Rokonet ORBiT-14 Bedienungsanleitung PDF herunterladen (Seite 43)

Installation and Programming Manual

SYSTEM: SYSTEM CONTROL

Quick Key Item Default Explanation

SYSTEM CONTROL (cont’d)

1 2 14 Alarm ZE Cut NO

if YES: produces an alarm if the communication between the

panel and any Zone Expander is lost

if NO: no alarm will occur if the communication between the

panel and any Zone Expander is lost; however, the

system will produce a local trouble indication

1 2 15 Fire Temporal Pattern NO

if YES: during a fire alarm, the external sounder(s) will

produce a pattern of three short bursts, followed by a

brief pause between them

if NO: during a fire alarm, the cadence produced by external

sounder(s) will be a pattern of 2 seconds ON, then

2 seconds OFF

1 2 16 Code Grand Master NO

if YES: only the individual(s) with the Authority Level of Grand

Master can change all User Codes, along with the

TIME and DATE

if NO: besides the Grand Master, the individual(s) with the

Authority Levels of Master and Manager can change

their own User Code and all codes with a lower

Authority Level, along with the TIME and DATE

1 2 17 Audible Jamming

Not for UL

Installations

• relates to the Jamming Time parameter (on page 40)

if YES: once the specified time is reached, the panel will

activate the external sounder and send a reporting

code to the Central Station if so defined (see page

89)

if NO: as above, except the external sounder will not operate

1 2 18 Technician Tamper NO

if YES: it will be necessary to enter the Installer Code to reset

a Tamper Alarm (indicated by a lit keypad Tamper

LED); thus, Tamper Alarm (and Tamper LED) resets

will require the intervention of the alarm company

if NO: a Tamper Alarm (and the resulting Tamper LED) is

reset by correcting the problem–requiring no alarm

company help

1 2 19 Technician Reset NO

if YES: it will be necessary to enter into the Installer Code to

make “READY” an alarmed partition after it’s been

reset, thus requiring the intervention of the alarm

company

§ NOT READY-TECH RESET will be displayed

on relevant LCD Keypads

§ note that before the READY LED can light, all

zones within the partition must be secured

if NO: once an alarmed partition is reset, the READY LED

will light when all zones are secured

1 2 20 Abort Alarm NO

if YES: and an alarm is sent in error, it will be possible for the

Central Station to also receive an “Abort Alarm” code,

sent subsequent to the initial Alarm Code, if a valid

User Code is entered to reset the alarm within 90

seconds after being initiated

if NO: no “Abort Alarm” code will be sent once an alarm has

been triggered

1 2 21 Summer/Winter Clock NO

if YES: the ORBIT-Pro will automatically set its Time of Day

clock one hour ahead in the spring (on the first

Sunday in April) to conform to USA Daylight Savings

Time and one hour back in the fall (on the last Sunday

in October) to conform to USA Standard Time)

if NO: no such accommodation is made

INSTALLER PROG:

1)SYSTEM ↓↓

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare

Rokonet ORBiT-14 Bedienungsanleitung Seite 43

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Rokonet ORBiT-14